We recommend that you use approximately one bottle of EGGER Joint & Joist Adhesive for every six boards when following our recommended installation methods.
Apply two (approximately 5mm) parallel beads of EGGER Joint & Joist Adhesive to the top of the joist.
Apply EGGER Joint & Joist Adhesive directly to the tongue and groove of the profile of the board joint, continuing along the entire board length.
Exposed fitting heads, perimeter edges, cut edges and stairwells must be sealed using EGGER Joint & Joist Adhesive.
Once the building is watertight, excess adhesive can be removed with a scraper.
For further information, please refer to our glue guidelines document here.