EGGER Laminates including standard and door size must be stored in an enclosed and dry room in normal temperate environments.
Once the original packaging is removed, the laminate must be stored on full-surface, horizontal protective boards. Direct floor contact and/or exposure to the sun must be avoided. The uppermost sheet should be laid with its decorative side facing down and should be covered with a protective board of at least the same size format.
Where horizontal storage is not possible, the laminate sheets should be stored at an angle of approximately 80°, in an inclined rack, providing support to the surface area and ends. Using a protective board of at least the same size format is required for this storage as well.